Kalmus was bought by AR. If I remember correctly, the units that did not use a standard GPIB connector had the pin-out in the manual.
luck, Brian From: [email protected] [mailto:[email protected]]On Behalf Of [email protected] Sent: Thursday, May 08, 2008 9:08 AM To: [email protected] Subject: Kalmus Amplifiers Does any one remember or still use a Kalmus amplifier. We have one but in a recent move we lost the special GPIB cable for it. Does any one know what the pin out is for this cable or better still have a spare one? Any help would be gratefully appreciated. Best regards John Harrington EMC Laboratory Manager F-Squared Laboratories Tel: 440 632 5541 x 203 Fax: 440 632 5542 Cell: 440 832 0558 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
