Bob

 From my (limited) experience with Japanese radio testing, even for 
low power devices, all measurements are made via a direct measurement 
at the antenna port.  In this case the measurement would be made 
using a resolution bandwidth of 1MHz and the limit is 3mW (4.8 
dBm).  There is also (likely) a limit on the maximum antenna gain 
that can be used with the device.

Hope this helps,

Mark

At 07:44 AM 5/13/2008, rehel...@mmm.com wrote:
>I am reading a Japanese standard for 2.4 GHz and it gives an "antenna
>power" limit of 3mW/MHz (no antenna distance). Can someone help as to how
>this is measured. I guess I don't understand the parameter being measured.
>
>Thanks
>Bob Heller
>3M Company
>St. Paul, MN 55107-1208
>Tel:  651- 778-6336
>Fax:  651-778-6252
>
>-
>----------------------------------------------------------------
>This message is from the IEEE Product Safety Engineering Society
>emc-pstc discussion list.    Website:  http://www.ieee-pses.org/
>
>To post a message to the list, send your e-mail to emc-p...@ieee.org
>
>Instructions:  http://listserv.ieee.org/request/user-guide.html
>
>List rules: http://www.ieee-pses.org/listrules.html
>
>For help, send mail to the list administrators:
>
>      Scott Douglas           emcp...@ptcnh.net
>      Mike Cantwell           mcantw...@ieee.org
>
>For policy questions, send mail to:
>
>      Jim Bacher:             j.bac...@ieee.org
>      David Heald:            emc-p...@daveheald.com
>
>All emc-pstc postings are archived and searchable on the web at:
>
>     http://www.ieeecommunities.org/emc-pstc

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to emc-p...@ieee.org

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           emcp...@ptcnh.net
     Mike Cantwell           mcantw...@ieee.org

For policy questions, send mail to:

     Jim Bacher:             j.bac...@ieee.org
     David Heald:            emc-p...@daveheald.com

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc




Reply via email to