All Has anyone got any experience of programming a Teseq (formerly Schaffner) NSG 2200 AC switch via either RS232 or IEEE? If you have would you be prepared to "share" the command set, please? Ian Gordon
The contents of this email and any attachments are confidential and are provided solely for the use of the intended recipient(s). If you are not the intended recipient, you are hereby notified that any copying, disclosure, distribution, or use of this e-mail, its attachments or any information contained therein is unauthorised and strictly prohibited and you should please contact the sender immediately and delete this e-mail and any attachments from your system. No responsibility is accepted for any virus or defect that might arise from opening this e-mail or attachments, whether or not it has been checked by anti-virus software. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
