Further down the list are these as well:
IEC 61000-4-2 Ed1.2 April 2001
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement
techniques - Electrostatic discharge immunity test
IEC 61000-4-3 Ed3.0
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement
techniques - Radiated, radio-frequency, electromagnetic field immunity test
IEC 61000-4-4-Ed.2.0
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement
techniques - Electrical fast transient/burst immunity test
IEC 61000-4-6-Ed.2.2 May 2006
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement
techniques - Immunity to conducted disturbances, induced by radio-frequency
fields
Ron Wellman
-----Original Message-----
From: Ronald R. Wellman [mailto:[email protected]]
Sent: Thursday, May 29, 2008 5:44 AM
To: Joe Randolph; Emc-Pstc
Subject: RE: EMC immunity requirements for medical device in Canada?
The following web page lists recognized standards:
http://www.hc-sc.gc.ca/dhp-mps/md-im/s
andards-normes/md_rec_stand_im_norm_lst_2_e.html
where the following apply to EMC:
IEC 60601-1-2 Ed. 2.0, Ed. 2.1 : 2004-11-01
Medical electrical equipment – Part 1-2: General requirements for safety –
Collateral Standard – Electromagnetic Compatibility – Requirements and
Tests
CAN/CSA-C22.2 NO. 60601-1-2A-03 (R2006)
Medical electrical equipment - Part 1-2: General requirements for safety -
Collateral Standard: Electromagnetic Compatibility – Requirements and Tests
(Adopted Amendment 1:2004 to IEC 60601-1-2:2001)
IEC 60601-1-2 Ed.3.0 March 2007
Medical electrical equipment - Part 1-2: General requirements for basic safety
and essential performance - Collateral standard: Electromagnetic compatibility
- Requirements and Tests
Best regards,
Ron Wellman
-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of
Joe Randolph
Sent: Wednesday, May 28, 2008 9:17 PM
To: Emc-Pstc
Subject: EMC immunity requirements for medical device in Canada?
Hello All:
I am looking at a device that is used in the home for
monitoring various
medical parameters (such as blood pressure). This device uploads data to a
server via a modem, using a regular phone line.
There is some uncertainty whether this device should be treated
as ITE or as
medical equipment. If it is ITE, there are no EMC immunity requirements for
Canada such as static discharge, radiated immunity, EFT, etc.
If the device is classified as medical equipment, are there EMC
immunity
requirements for Canada? If so, what standards are called out?
Thanks,
Joe Randolph
Telecom Design Consultant
Randolph Telecom, Inc.
781-721-2848 (USA)
[email protected]
http://www.randolph-telecom.com
<http://www.randolph-telecom.com/>
-
---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to
[email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell
[email protected]
For policy questions, send mail to:
Jim Bacher: [email protected] David Heald:
[email protected]
All emc-pstc postings are archived and searchable on the web
at:
http://www.ieeecommunities.org/emc-pstc
- ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected] David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
