While not mandatory the ENEC Mark can be useful on components as some Agencies 
will accept this Mark as showing compliance to the applicable component 
standards. I have found this useful when getting a CB report for a product 
which incorporates an ENEC Marked safety critical component.........




From: [email protected] [mailto:[email protected]] On Behalf Of John Woodgate
Sent: Thursday, June 19, 2008 3:32 PM
To: [email protected]
Subject: Re: ENEC european complaince


In message <[email protected]>, dated Thu, 19 
Jun 2008, sudhakar wasnik <[email protected]> writes:


> 
>Is  ENEC mark mandatory for electrical products?
> 

No, absolutely not. Compliance with the legal requirements of the Low 
Voltage Directive effectively makes such schemes irrelevant.
-- 
OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk Either we 
are causing global warming, in which case we may be able to stop it, or natural 
variation is causing it, and we probably can't stop it. You choose! John 
Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to [email protected]

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           [email protected]
     Mike Cantwell           [email protected]

For policy questions, send mail to:

     Jim Bacher:             [email protected]
     David Heald:            [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to [email protected]

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           [email protected]
     Mike Cantwell           [email protected]

For policy questions, send mail to:

     Jim Bacher:             [email protected]
     David Heald:            [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc



Reply via email to