The question has come up whether there are any requirements on the gold plating thickness for Ethernet Connectors (not used for telco interface), similar to the requirements for 50u" of Gold for Telco connections. I have not found any yet. However, I am going to check with the safety agency that does our approvals to see if they have any requirements that I missed (but I doubt it). Does anyone else know of a gold plating thickness requirement for an Ethernet Lan connection? Best Regards,
Bret McDougal <>< 972-759-2478 Senior Manager 972-852-1001 (Fax) PQA & ES [email protected] Siemens Home & Office Communications http://gigaset.siemens.com/provider/ <h tp://subscriber.communications.siemens.com/> This message and any attachments are solely for the use of intended recipients. They may contain privileged and/or confidential information, attorney work product or other information protected from disclosure. If you are not an intended recipient, you are hereby notified that you received this email in error, and that any review, dissemination, distribution or copying of this email and any attachment is strictly prohibited. If you have received this email in error, please contact the sender and delete the message and any attachment from your system. Thank you for your cooperation. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
