Hi Jim,
You will likely need to consult the CB Bulletin, which was very recently put online. National differences, special conditions, etc details are available on a subscription basis. The link is: http://www.iec.ch/online_news/etech/arch_2008/etech_0408/ca_1.htm IHTH. Best regards, Ron Pickard RPQ Consulting Glendale, AZ 85303 +623.512-3451 tel, +623.848-9033 fax [email protected] www.rpqconsulting.com ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Goedderz, Jim Sent: Monday, July 14, 2008 5:47 AM To: [email protected] Subject: RE: South Africa CB You all know what it’s like trying to get something done in the final minutes Friday. You forget to add critical data such as the standard is 60950-1. Thank you again. James Goedderz Product Safety Engineer Tyco/Sensormatic 561.912.6378 _____________________________________________ From: Goedderz, Jim Sent: Friday, July 11, 2008 4:33 PM To: '[email protected]' Subject: South Africa CB Group, Can anyone inform me if there are “National Deviations” to the CB scheme for South Africa? Our customer is asking for a CB report, and I see that SA is a CB member, but I don’t have any list of national deviations. Thank you for your support. James Goedderz Product Safety Engineer Tyco/Sensormatic 561.912.6378 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
