What coax cable types do you recommend for a very low loss cable up to 6Ghz
but also flexible?  I need a good low loss cable to connect between my horn
antenna and the floor connection of my Heliax.  The cable only needs to be 5
or 6 feet long but flexible enough so I can change polarization on my antenna.
 

 

I have looked at many cable types in catalogs and on-line but you cannot tell
if it will be flexible without seeing it for real.  I ordered a cable called
“Helical Super Flex”.  I liked the low loss properties but it was not at
all flexible, let alone super flexible.  It was barely semi-rigid in my book .
 

 

I tried RG393/U but it is not very flexible and I prefer a lower loss cable if
possible. 

 

What do you all recommend?  What is the best?  Where can I buy it in small
quantities and possibly in custom lengths?

 

Thanks to all in advance.

 

The Other Brian

 

 

 

 

 

_________________________ 

LECO Corporation Notice: This communication may contain confidential
information intended for the named recipient(s) only. If you received this by
mistake, please destroy it and notify us of the error. Thank you. 
- ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/ 

To post a message to the list, send your e-mail to [email protected] 

Instructions: http://listserv.ieee.org/request/user-guide.html 

List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators: 

Scott Douglas [email protected] Mike Cantwell [email protected] 

For policy questions, send mail to: 

Jim Bacher: [email protected] David Heald: [email protected] 

All emc-pstc postings are archived and searchable on the web at: 

http://www.ieeecommunities.org/emc-pstc -
---------------------------------------------------------------- This message
is from the IEEE Product Safety Engineering Society emc-pstc discussion list.
Website: http://www.ieee-pses.org/ 

To post a message to the list, send your e-mail to [email protected] 

Instructions: http://listserv.ieee.org/request/user-guide.html 

List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators: 

Scott Douglas [email protected] Mike Cantwell [email protected] 

For policy questions, send mail to: 

Jim Bacher: [email protected] David Heald: [email protected] 

All emc-pstc postings are archived and searchable on the web at: 

http://www.ieeecommunities.org/emc-pstc 

Reply via email to