Brian It was transferred to IEC TC22 and published as IEC 62103. It is available for preview on the IEC website.
"International Standard IEC 62103 has been prepared by IEC technical committee 22: Power electronic systems and equipment. The text of this standard is based on the European Standard EN 50178, prepared by the CENELEC Task Force BTTF 60-1: Assembly of electronic equipment." John McAuley www.cei.ie [email protected] ***************************************************************** DISCLAIMER: The information contained in this e-mail may be confidential and is intended solely for the use of the named addressee. Access, copying or re-use of the e-mail or any information contained therein by any other person is not authorised. If you are not the intended recipient please notify us immediately by returning the e-mail to the originator ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Brian O'Connell Sent: 04 September 2008 19:02 To: [email protected] Subject: EN 50178 scope Good People, I am looking for the scope clause and/or table of contents to EN 50178. The only thing I could find was the 'abstract' statement on the SAI site: "Applicable to the use of electronic equipment in power installations requiring a uniform technical level of safety and reliability. Specifies the minimum requirements for the design and manufacture of EE, to protect against electric shock, for testing and integrating into systems for power installations." Similar to UL508 ?? thanks much, Brian - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
