Gentlemen, Does the FCC have any regulations or guidance for integrating a radio device into a larger system, specifically for a part 22/24 radio where the device will be concealed from view? Per 15.212, there is a lot of criteria involving the device having a Grant with Modular Approval and then if the integrator conceals the radio module’s FCC ID from view we must put a label on the outside that says “Contains FCC ID:xxxxxx”. I’m quite familiar with these requirements for 802.11 and RFID radio devices. But that code section is strictly for unlicensed part 15 transmitters. What about licensed Part 22 and 24 transmitters such as cellular radio devices such as:
FCC ID N7NAC875 https://fjallfoss.fcc.gov/oetcf/eas/rep rts/ViewExhibitReport.cfm?mode=Exhibits RequestTimeout=500&calledFromFrame=N&ap lication_id=184431&fcc_id=%27N7NAC875%27 Note: Does not have “modular approval”, but that was a requirement under part 15.212… which may or may not be applicable here. I have submitted an inquiry with the FCC OET. But that usually take a couple weeks to get a responce. I am hoping someone here might be able to point me toward the rule section of Part 22 and 24 that would provide guidance. Thank you! Adam Rudd - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
