Brian, Can you change the WLAN to operate in 802.11a mode which uses the 5GHz band? 11b/g is in the 2.4GHz band.
The Access Points will most likely be able to support 11a but older clients may not. BTW - I've worked in the WLAN space for a couple of years and never heard of such a large issue with microwave ovens. I wonder if you have particularly bad models? (Although from Don's comments, this may not be so uncommon.) ...Marko From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Monday, October 06, 2008 1:27 PM To: [email protected] Cc: [email protected] Subject: Re: Microwave Oven Interference with 2.4Ghz Wireless LAN Except for rebuilding the break rooms with foil-lined dry wall, metal flooring, screened windows, filtered power, waveguide-beyond-cutoff ventilation grills, and RF tight doors, I don't know there is much for a solution. I was told that in one major Boeing plant, communications as 2.4 GHz is all but impossible -- there are microwave ovens scattered around the various break rooms running off of all three phases of the electrical power (120/208 volts "Y"); and due to variety of manufacturers, generating RF during both polarities of each phase. In other words, continuous 2.4 GHz RF. Except for specialize industrial units, I don't think you will find microwave ovens running at any other frequency. Don Borowski Schweitzer Engineering Labs Pullman, WA, USA "Kunde, Brian" <brian_kunde@leco tc.com> To Sent by: "emc-pstc" <[email protected]> [email protected] cc Subject 10/06/2008 01:02 Microwave Oven Interference with PM 2.4Ghz Wireless LAN I have just received and interesting call from our IT guys in our production facility. They have installed a 2.4Ghz wireless LAN system in our production and stock room areas, which is a huge area, and which includes 13 Access Points and a couple dozen wireless devices such as bar code readers, computers, and printers. They discovered that they are having a major interference problem which they have narrowed down to the Microwave Ovens in the two break areas. Evidently, Microwave Ovens run at 2.45Ghz. It would be very difficult to remove the ovens or to move the break areas. Have any of you experts have experience with this issue? Any suggestions? Are new ovens better then older ones? Are the microwave ovens that run at a different frequency? Would it help to try and shield the ovens better? Please help. The Other Brian LECO Corporation Notice: This communication may contain confidential information intended for the named recipient(s) only. If you received this by mistake, please destroy it and notify us of the error. Thank you. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc CONFIDENTIALITY This e-mail message and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail message, you are hereby notified that any dissemination, distribution or copying of this e-mail message, and any attachments thereto, is strictly prohibited. If you have received this e-mail message in error, please immediately notify the sender and permanently delete the original and any copies of this email and any prints thereof. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
