My understanding is that some power supply battery chargers are exempt and power supplies with multiple outputs are also exempt. Regards Barry Esmore AUS-TICK 281 Lawrence Rd Mount Waverley Vic 3149 Australia Ph: +613 9886 1345 Fax: +613 9013 9552
----- Original Message ----- From: Denis Ryskamp <mailto:denis_rysk...@trimble.com> To: Anders Svensson B <mailto:anders.b.svens...@ericsson.com> ; emc-p...@ieee.org Sent: Monday, 17 November 2008 11:44 PM Subject: RE: MEPS requirements for Australia/New Zealand - When is it mandatory? *****Targeting dates from 1st December 2008 in Australia and 1st April 2009 in New Zealand - Valid for all Power supplies? *****External power supplies - Marking needed? *****Energy Efficiency III requirements mandatory, IV optional - Briefly the requirements? *****go to link: http://www.energyrating.gov.au/eps2.html - Only marking requirements of status enough? *****Registration of EPS Regards, Denis Ryskamp Environmental Compliance Manager Trimble Dayton 5475 Kellenburger Road Dayton, Ohio 45424 *: 01-937-245-5539 *: denis_rysk...@trimble.com ________________________________ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Anders Svensson B Sent: Monday, November 17, 2008 7:37 AM To: emc-p...@ieee.org Subject: MEPS requirements for Australia/New Zealand Dear experts, Anyone who knowes about the requirements for MEPS for Australia and New Zealand for a external power supply? Forv example: - When is it mandatory? - Valid for all Power supplies? - Marking needed? - Briefly the requirements? - Only marking requirements of status enough? All inputs is very welcome! Thanks in advance! Regards Anders - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc