In message <[email protected]>, dated Thu, 20 Nov 2008, [email protected] writes:
>I'm looking to purchase an EMI receiver for use in a 5 meter chamber. >Does anyone recommend a certain model? I would want one that has at >least a frequency range from 150kHz to 18GHz so one unit can be used >for radiated and conducted emission measurements. > If you had two, with overlapping ranges, you wouldn't be entirely scuppered when one of them fails or has to go away for calibration. There is likely to be a lot of 'nearly-new' about at good prices, due to the present unfortunate situation. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk Either we are causing global warming, in which case we may be able to stop it, or natural variation is causing it, and we probably can't stop it. You choose! John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
