Hi TOB, You might find what you're looking for from Shurter at: http://www.schurter.com
They have quite an assortment of panel mount IEC 60320 style power input connector products, filtered and unfiltered. Best regards, Ron Pickard [email protected] From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Wednesday, December 10, 2008 3:30 PM To: [email protected] Subject: Re: Outlet Connector 250VAC 2.5 amps You're almost there. 'Outlet' versions of the IEC 320 connectors you mentioned would be type C5 or C7. See <http://en.wikipedia.org/wiki/IEC_connector#C7_and_C8_connectors> However, I don't know where you would buy a chassis-mount version of a C5 or C7. Pat Lawler EMC Engineer SL Power Electronics Corp. 6050 King Drive, Bldg. A [email protected] wrote on 12/10/2008 11:31:49 AM: > I'm looking for an AC Outlet connector similar to the IEC 60320 C6 > or C8, but an outlet instead of an inlet. I need to run AC power > out of my product to a small external device which mounts on the > side (lab equipment) and will only draw less than 2 amps at 230 > Vrms. I do not want to use the large Appliance outlet connector. Any > suggestions? I checked Interpower and Power Dynamics but no luck. > Wouldn't such an application require the ground pin to mate first > and break last? If so then I would be able to use just any connector. > > The Other Brian > > > _________________________ > > LECO Corporation Notice: This communication may contain > confidential information intended for the named recipient(s) only. > If you received this by mistake, please destroy it and notify us of > the error. Thank you. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
