Our lab is working on becoming a BSMI recognized EMC Lab via the APEC Tel MRA to which both NIST (USA) and BSMI (Taiwan) are signatories. Does BSMI have any specific requirements regarding what information must appear in an EMC Test Report for ITE? If so, where are these documented?
I have looked through CNS13438, and the only information I see is that the 6 emissions closes to the limit must be recorded, and that a measurement uncertainty must be included. We have seen test reports issued by other labs that list all internal oscillators, and others that do not. Is this a requirement? John D. Flavin Teradata TCP Engineering 17095 Via del Campo San Diego, CA 92127 [email protected] V: (858) 485-3874 F: (213) 337-5432 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
