Hello all, I would appreciate your suggestion on identifying what the most appropriate IEC Standard for EMC requirements for the following electrical equipments. - RF Amplifiers (from 8 kW up to 35 kW) - Circulating water cooling system (loop liquid to liquid heat exchanger) - DC Power Supplies (1000 W and higher) - RF Signal Generator - Cryocooler compressors IEC 61326-1, IEC 61000-6-1, IEC 61000-6-2, ...? Does somebody know if there is a guidance tool to identify the applicable EMC standard based on product type/characteristics, application? Thanks if you could direct me to some possible tools. Thank you very much. Rodrigo Rodriguez
________________________________ The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail. Get busy. <http://www.windowsl ve.com/campaign/thenewbusy?tile=multiac ount&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
