Hi Dave
As it is a pulsed field I believe you will find it very difficult to find a broadband field probe that measures a pulse of this type. One way to measure this field is to use a passive loop antenna such as the EMCO 6509 into a measuring receiver or spectrum analyser (with input protection) or oscilloscope. A smaller loop antenna may be needed depending on the size of your transmit loop. Again see ETS Lindgren/AH Systems/Teseq websites for suitable loops. MIL Std 461 could also be a useful source of techniques. John McAuley www.cei.ie <http://www.cei.ie> [email protected] <mailto:[email protected]> ***************************************************************** DISCLAIMER: The information contained in this e-mail may be confidential and is intended solely for the use of the named addressee. Access, copying or re-use of the e-mail or any information contained therein by any other person is not authorised. If you are not the intended recipient please notify us immediately by returning the e-mail to the originator ________________________________ From: Dave Wilson [mailto:[email protected]] Sent: 02 June 2010 19:26 To: [email protected] Subject: [PSES] Magnetic field sensor for 61000-4-10 Hi all, IEC 61000-4-10 requires that the magnetic field sensor used to measure the generated field has a BW >10MHz, however I haven't been able to identify a manufacturer of sensors meeting that spec. Any pointers gratefully received. Regards, Dave - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.819 / Virus Database: 271.1.1/2899 - Release Date: 06/02/10 10:57:00 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
