Looks like my library skips past this standard. Does anybody have the particulars, 5% salt, 35C, wet/dry cycles, etc for this test.
I’m comparing a Mil-810 test with another commercial requirement and I see the mil test at 2 24 hour cycles, with a 24 hour dry cycle, but the commercial standard has 144 hours of salt. So I want to see what the IEC has to say about it. Thanks Gary McInturff Reliability/Compliance Engineer Advanced Input Systems Esterline Corporation 600 West Wilbur Avenue Coeur d' Alene, Idaho 83815 Tel: 208 635 8306 Fax 208 635 8706 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
