Sylvia – nice! This gives me an excellent starting point. Rather than seeing if the screen falls of I will be doing some pull tests on the test samples and compare it too the initial strength, but it gives me some established procedure to work against. Are there others – probably but this suits my needs quite well.
Thank you for the time and effort in finding that – and I suspect you or your folks had a hand in the test formatting which I will now steal and claim as my own. I will steal credit, but I never accept blame :-) Thank you Gary McInturff 208 635 8306 ________________________________ From: Sylvia Toma [mailto:[email protected]] Sent: Thursday, May 06, 2010 12:15 PM To: McInturff, Gary; [email protected] Subject: RE: Adhesion test Hi Gary, Please see attached. Thanks Sylvia From: [email protected] [mailto:[email protected]] On Behalf Of McInturff, Gary Sent: Thursday, May 06, 2010 8:25 AM To: [email protected] Subject: Adhesion test Importance: Low Looking for a simple adhesion test over time. I can measure initial force obviously, but looking for a standardized test (ANSI IEC) – or just one you’ve found useful. I have some ideas but would like to be able to tie it to aging – hopefully accelerated aging. I can just duplicate some test found on data sheets from some adhesive suppliers but they don’t’ seem to tell the whole story. Thanks Gary McInturff Reliability/Compliance Engineer Advanced Input Systems Esterline Corporation 600 West Wilbur Avenue Coeur d' Alene, Idaho 83815 Tel: 208 635 8306 Fax 208 635 8706 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
