Remark: if self-certified, products sold in the EU must comply with the requirements of current harmonized EN standards.
Best Regards, John peter merguerian <[email protected]> Sent by: [email protected] 04/28/2010 02:53 PM To [email protected], [email protected] cc Subject IEC60950-1 version for replacement parts Dear All, 1. An ITE product is sold in Europe and conforms to IEC60950-1 1st Edition dated 2002. 2. The product is no longer manufactured. Units are either in service in the EU or sitting on shelves ready to be deployed. 3. Spare parts such as power supplies have to be shipped to the EU to serve as replacement parts. 4. Is it ok for the spare parts to comply with the older 1st edition of the standard since the system was evaluated to the 1st edition of the IEC60950-1standard or do they have to conform to the IEC60950-1 2nd edition 2005 version of the standard? Thanks, Peter Merguerian [email protected] <mailto:[email protected]> http://globalcompliance.blogspot.com <http://globalcompliance.blogspot.com/> (925) 487-4640 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc <http://www.ieeecommunities.org/emc-pstc> Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> Instructions: http://listserv.ieee.org/request/user-guide.html <http://listserv.ieee.org/request/user-guide.html> List rules: http://www.ieee-pses.org/listrules.html <http://www.ieee-pses.org/listrules.html> For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
