Forwarded to the list for Jeff Collins. Please reply directly to him. Scott Douglas EMC-PSTC List Admin
-------- Original Message -------- Subject: Re:200 PSI @ 4500 GPM Safety Test List-Post: [email protected] List-Post: [email protected] List-Post: [email protected] Date: Tue, 13 Apr 2010 20:52:53 -0700 (PDT) From: jeff collins <[email protected]> <mailto:[email protected]> To: [email protected] CC: [email protected] Group, Looking for a lab in the USA to handle this testing. Already tried Wyle in S.CA. Prefer CA location but will consider other US locations. Yes, I know that is a lot of water!!....and water pressure! But we need to test this pump for safety and need a lab that can handle: 4,500 gallons per minute, it could be broken up into two or four pumps, since there are multiple intakes. We believe that we only really need to run the pump at 4-5 fifteen-minute test intervals with different dynamics. Let me know if you know of a lab that can handle this. Regards, Jeffrey Collins Compliance & Reliability Engineering - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
