Hi,
as I know in Europe the CENELEC voting for prEN 62368 was negative! Therefore we have the situation that for the Low Voltage Directive only EN 60950-1 and EN 60065 gives a “presumption of conformity” regarding CE marking. CENELEC is waiting for the 2nd edition of IEC 62368! On the IEC stage I know that the national test labs within the CB scheme are preparing a “TRF” for IEC 62368 (may be available in summer?). Mit freundlichen Grüßen Dipl.-Ing. Michael Loerzer Managing Director Regulatory Affairs Specialist _________________________________________ Globalnorm GmbH Alt-Moabit 94 10559 Berlin Fon +49 30 3229027-51 Mobile +49 170 3229027 Fax +49 30 3229027-59 Mail [email protected] <mailto:[email protected]> www.globalnorm.de <http://www.globalnorm.de/> www.globalnorm.ca <http://www.globalnorm.ca/> neu: www.product-compliance.com <http://www.product-compliance.com/> _________________________________________ Globalnorm GmbH, Sitz der Gesellschaft: Alt-Moabit 94, 10559 Berlin Geschäftsführer: Dipl.-Ing. Michael Loerzer Amtsgericht Berlin-Charlottenburg HRB 105204 B, USt-ID-Nummer: DE251654448 Von: [email protected] [mailto:[email protected]] Im Auftrag von Ron Pickard, RPQ Gesendet: Freitag, 12. Februar 2010 05:07 An: EMC-PSTC Betreff: IEC 62368-1:2010 query To all, The IEC has just announced the publication (21-Jan-2010) of the safety standard IEC 62368-1:2010 ed1.0 (now encompassing audio/video, information and communication technology equipment), that’s intended to evolutionize safety analysis/evaluations thru HBSE. Now that this IEC base standard is published, does anyone have a feel for when the national derivation standards will be published and when the CB Scheme will adopt it? My guess is not anytime soon, but I could be wrong in this case. And, I’m wondering how significantly will the CB Bulletin need to be revised to accommodate this new standard? It may, however, be a bit early in the process for anyone to know, but I wanted to ask anyway. I need to know if and when I should be serious about advising the purchase of this standard. Any assistance will be most helpful and much appreciated by the group, I’m sure. I look forward to your replies. Best regards, Ron Pickard RPQ Consulting Glendale, AZ 85303 +623.512-3451 tel, +623.848-9033 fax [email protected] www.rpqconsulting.com <http://www.rpqconsulting.com/> www.linkedin.com/in/RonPickard - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
