generic wireless stuff (802.11X) -> c-tick required mixed technologies (eg, RF modem) -> a-tick 'more' relevant
In general, a-tick is indicated if end-use will be connected to network operated by a carrier/service provider. I am certain the ACMA website talks about this, but I could be wrong; or I could be incorrect, or not. Brian From: [email protected] [mailto:[email protected]]On Behalf Of Nic Johnson Sent: Thursday, February 11, 2010 7:18 AM To: [email protected] Subject: C-Tick vs. A-Tick Can anyone help to clarify the scope of an C-Tick vs. a A-Tick for Australia? Does an A-Tick apply to wireless digital devices or just equipment connected to a telecommunications network? Would this apply to any equipment with a modem or network port? Thanks. Nic Johnson - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
