Today's FCC is much more concerned about shutting down a lot of the programming on the AM broadcast band than preserving a pristine rf ambient to maximize the range of said broadcasts.
I will be surprised if you get anything more than a pro forma response. Ken Javor Phone: (256) 650-5261 > From: Derek Walton <[email protected]> > Date: Fri, 18 Dec 2009 08:07:05 -0600 > To: IEEE EMC & SAFETY PSTC <[email protected]> > Subject: Emissions from Computer power supplies - update > > A few days ago I appealed for a compliant computer power supply. Since > that time my client accumulated many models ( 15 ) that fitted their > needs and we tested them all. The spread is horrific. Over 60 dB and > some areas 80 dB under identical loads. > > If anyone would like to see the variation of several of them I'll post > the emissions chart. > > I have taken the decision to write to the FCC and complain about these > being sold on the streets. EVERY single non-compliant supply was made > off shore, only one or two off shore supplies were compliant. > > I encourage anyone finding such derisory performance to report it to the > FCC. When I fully understand the path to do so, I'll update the list so > everyone knows how to do so. > > On a lighter note, I'd like to wish everyone a happy holidays. > > Sincerely, > > Derek Walton > L F Research > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > Graphics (in well-used formats), large files, etc. can be posted to that URL. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
