Hello Peter,
This may or may not be helpful but ISO 1043-1 and many others referenced state: All parts that weigh 25 grams or more must be physically marked, if adequate space is available and the functionality of the part is not compromised. On all parts weighing less than 25 grams, it is strongly encouraged to include physical marking, where practical. Where physical marking on parts weighing less than 25 grams is mandatory, this requirement will be noted on applicable drawings or procurement documents. The preferred character size is 3mm to 5 mm high and with a profile depth (or height) of approximately 0.2 mm. On smaller parts where 3mm to 5 mm text is not possible, smaller text can be used. The material identification symbol is to be marked between two angle brackets, “>” and “<”, using only capital letters. Example: >ABS<. ABS Blends would look like example >PC+ABS< Regards, Mark Schmidt From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Thursday, November 12, 2009 4:22 PM To: [email protected] Subject: Recycling number for ABS Hello group, Does anyone know what the recycling number is for ABS or can point me to where I may find this info please? Thanks Peter - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
