The problem maybe that you are exceeding your maximum number of pulses per second.
I have a PEFT Junior and the Max is 600. So my Spike_Freq X Burst_Duration X Burst_Freq must be less than or equal to 600 impulses per second otherwise I get a ‘Frequency Too High” error. The Other Brian ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Reginald Henry Sent: Thursday, October 29, 2009 1:03 PM To: [email protected] Subject: Haefely PHV 41.2 Unit 4Kv All, I am attempting to modify an existing program that I am using for the EFT/B testing using the Haefely PHV 41.2 Unit 4Kv I wish to increase the frequency for an investigation testing. But I keep on getting error message on the display "frequency too high" I wish to change it to 4KHz If you can help pls email or call Thanks Best Regards, Reg Henry Reginald Henry Tel: (631) 952-2288 Ext: 310 ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of peter merguerian Sent: Thursday, October 29, 2009 9:44 AM To: [email protected]; CharlesGrasso Subject: Re: India_US MRA for EMC? They have no MRA but if this is telecom related, TEC should accept your US accredited laboratory emc test reports. Telecom tests are done in-country Peter --- On Wed, 10/28/09, Grasso, Charles <[email protected]> wrote: From: Grasso, Charles <[email protected]> Subject: India_US MRA for EMC? To: [email protected] Date: Wednesday, October 28, 2009, 12:12 PM Hello all! Does anyone know if a MRA exists between the US and India for accepting EMC test reports? Best Regards Charles Grasso Compliance Engineer Echostar Communications (w) 303-706-5467 (c) 303-204-2974 (t) [email protected] <http://us.mc 120.mail.yahoo.com/mc/[email protected]> (e) [email protected] <http: /us.mc1120.mail.yahoo.com/mc/[email protected]> (e2) [email protected] <http://us.m 1120.mail.yahoo.com/mc/[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc <http://www.ieeecommunities.org/emc-pstc> Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> Instructions: http://listserv.ieee.org/request/user-guide.html <http://listserv.ieee.org/request/user-guide.html> List rules: http://www.ieee-pses.org/listrules.html <http://www.ieee-pses.org/listrules.html> For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc <http://www.ieeecommunities.org/emc-pstc> Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> Instructions: http://listserv.ieee.org/request/user-guide.html <http://listserv.ieee.org/request/user-guide.html> List rules: http://www.ieee-pses.org/listrules.html <http://www.ieee-pses.org/listrules.html> For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > ________________________________ CONFIDENTIALITY NOTICE: This transmission may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereof) is strictly prohibited. If you receive this transmission in error, please immediately contact the sender and destroy the material in it's entirety,whether in electronic or hard copy format. The views expressed in this communication may not necessarily be the views held by the company. Thank you. ________________________________ CONFIDENTIALITY NOTICE: This transmission may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereof) is strictly prohibited. If you receive this transmission in error, please immediately contact the sender and destroy the material in it's entirety,whether in electronic or hard copy format. The views expressed in this communication may not necessarily be the views held by the company. Thank you. _________________________ LECO Corporation Notice: This communication may contain confidential information intended for the named recipient(s) only. If you received this by mistake, please destroy it and notify us of the error. Thank you. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
