Pete, CB Bulletins are the only place I know of where you can find what you want. Used to be one Bulletin covered them all. Not so today.
Visit the IEC Web Store and search for CB Bulletins, you end up here: http://webstore.iec.ch/webstore/webstor .nsf/mysearchajax?Openform&key=CB%20Bulletins&sorting=&start=1&onglet=1# Take a few minutes and poke around. Bulletins are sold by the category now, CHF 105 each with an annual maintenance subscription for another CHF 89 each. You can even look into each a bit to see what standards are covered by each category. BTW, the price is a subscription to an online database, no more paper books to collect. I use these a fair amount when answering why I do not list some countries deviations in my CB report. I tell them that country is behind the times and has not adopted Edition 6 yet, much less adopting the current Edition 7. So I get away with not having to do Deviations for some country markets. (It all catches up eventually though.) Regards, Scott Douglas Director, Compliance Engineering Harman Consumer Don Gies wrote: > Pete, > > If you are economically-enabled to receive the CB bulletins, they have > perhaps the most extensive list of national differences published in one > location. > > Best regards, > > Don Gies, N.C.E > Senior Product Compliance Engineer > Alcatel-Lucent > Murray Hill, NJ 07974-0636 USA > > > -----Original Message----- > From: Pete Perkins [mailto:[email protected]] > Sent: Monday, October 19, 2009 1:35 PM > To: [email protected] > Subject: National Differences to IEC standards > > PSNet'ers, > > What have you found to be the best source for lists of National > Differences for IEC safety standards which have been generally adopted > around the world? > > br, Pete > > Peter E Perkins, PE > Principal Product Safety & Regulatory Consultant > Tigard, ORe 97281-3427 > > 503/452-1201 fone/fax > [email protected] > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > Graphics (in well-used formats), large files, etc. can be posted to that > URL. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > Graphics (in well-used formats), large files, etc. can be posted to that URL. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> > > > - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
