All, There will be a Northeast Product Safety Society / CNEC Product Safety Engineering Society meeting today, September 23rd, at the Holiday Inn, Boxborough MA. A social hour with light refreshments will begin at 7:00 PM and the technical meeting will start at 7:30 PM. Matt Cusson, Siemens Application Engineer at Dittman & Greer, and Don Reid, Sales Engineer for Dittman & Greer, will present this month’s topic concerning the application of safety interlocks and switches and MSS products demonstration and discussion. If you will be in the area, please feel free to join us as advanced notice or membership in NPSS or IEEE PSES is not required.
Matt Cusson is one of the Siemens Application Engineers on staff at Dittman & Greer and is also the SICK Optics factory-trained product specialist. He brings several years of prior experience in the safety products industry to his experience in assisting with a variety of automation and safety-related projects. Don Reid was Executive Vice President of Hendricks Engineering Inc in Indianapolis, IN prior to moving to CT to accept employment with Spirol International Corporation as General Manager of the Automation Products Division. Don has for the past 9 years been the Outside Sales Engineer covering E. CT, RI, and the Boston Metro area for Dittman & Greer, Inc. The presentation will include Siemen's "Safety the Movie", MSS products demonstration and discussion, plus the application of safety interlocks and switches. Time permitting, other demonstrations would include additional safety-related products, including personnel safety, security, and sensor intelligence. If you or anyone you know would like to give a product safety technical presentation, please contact Steve Brody by email at [email protected]. A technical presentation should be 45 to 60 minutes in duration and be related to product safety. Although the presentation may reference your company and it’s services, the presentation must not be simply company advertising. We would also appreciate any slides or handout materials be made available for posting on the NPSS web site. Releasing presentation materials for posting is desired but not a requirement to make a presentation. The 2009 NPSS meeting schedule is available on the NPSS website at http://www.nepss.net/calendar.html. Further information about the Northeast Product Safety Society and how to become a member is available at http://www.nepss.net. You can also contact one of the NPSS officers via links on the NPSS web site. Directions: >From Route 495 North or South, take Exit 28 to Route 111 East Turn right onto Adams Place (approximately 500 feet from Route 495 North) The Holiday Inn is the last building on the left. Regards, Matt Campanella NPSS Secretary Compliance Engineer Motorola, Inc. Broadband Communications Sector 111 Locke Drive Marlborough, MA 01752 (508) 786-7629 Direct (508) 786-7500 Main (508) 480-6332 Fax [email protected] email - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
