Bob, I am not sure if were indicating immunity only also considering emissions. Apply one of the emission standards (55022 or 55011) depending on the host product since the IC likely has an oscillator. For immunity, apply ESD and Radiated Immunity based on the host product. After that you may want to consider the host products requirements which may exceed the generic requirements above. Many medical host manufacturers will add to the list. If you search the archives, some others recently shared their experiences while testing batteries.
Best Regards, Jody Leber SGS Consumer Testing Services Manager, Battery Test Certification Program SGS - U. S. Testing Company, Inc. 16870 West Bernardo Drive, Suite 250 San Diego, CA 92127 USA Phone: 678.469.9835 Fax: 858.592.7107 E-mail: [email protected] <mailto:[email protected]> From: Robert Heller [mailto:[email protected]] Sent: Thursday, September 17, 2009 6:58 AM To: [email protected] Subject: [PSES] Smart Batteries What is the appropriate EMC testing standard for so-called "smart" batteries (batteries with digital circuitry)? Is there a specific standard for these batteries or are the generic standards appropriate? The stand-alone battery charger for them falls under EN 61204-3. Thanks, Bob Heller 3M EMC Laboratory, 76-1-01 St. Paul, MN 55107-1208 Tel: 651- 778-6336 Fax: 651-778-6252 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
