Moshe Shalom,
   
Immunity to Voltage Dips and Short Interruptions
 
            
Immuni
IEC-

61000-4-11 : 2001 or later
Dip (Reduction)  of  30% of supply voltage for 500 ms 
Dip (Reduction)  of  60% of supply voltage for 200 ms
Interruption (reduction of  >95% of supply voltage ) for 5 secs.
 
Best Regards,
 
Peter Merguerian

--- On Tue, 9/15/09, Moshe Valdman <[email protected]> wrote:



        From: Moshe Valdman <[email protected]>
        Subject: Power holdup in India
        To: "'[email protected]'" <[email protected]>
        Date: Tuesday, September 15, 2009, 11:04 AM
        
        
        Hi all,
        
        Does anyone have any information about holdup requirements or standards 
for
telecom power in India?
        This is typically 10 msec for the DC input (and usually 20 msec for 
AC/DC
power supplies), but I think due to low power quality, in India a longer time
might berequired
        
        thanks in advance,
        Moshe Valdman
        
        -
        ----------------------------------------------------------------
        This message is from the IEEE Product Safety Engineering Society 
emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected] <http://us.mc1120.ma
l.yahoo.com/mc/[email protected]> >
        
        All emc-pstc postings are archived and searchable on the web at:
        http://www.ieeecommunities.org/emc-pstc
        Graphics (in well-used formats), large files, etc. can be posted to 
that URL.
        
        Website:  http://www.ieee-pses.org/
        Instructions:  http://listserv.ieee.org/request/user-guide.html
        List rules: http://www.ieee-pses.org/listrules.html
        
        For help, send mail to the list administrators:
        Scott Douglas <[email protected] <h
tp://us.mc1120.mail.yahoo.com/mc/[email protected]> >
        Mike Cantwell <[email protected] <htt
://us.mc1120.mail.yahoo.com/mc/[email protected]> >
        
        For policy questions, send mail to:
        Jim Bacher:  <[email protected] <http:
/us.mc1120.mail.yahoo.com/mc/[email protected]> >
        David Heald: <[email protected] <http:/
us.mc1120.mail.yahoo.com/mc/[email protected]> >
        


-

This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>

All emc-pstc postings are archived and searchable on the web at
http://www.ieeecommunities.org/emc-pstc
Graphics (in well-used formats), large files, etc. can be posted to that URL. 

Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]> 

For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]> 


Reply via email to