I am assuming this means that the "Date of cessation of presumption of conformity of the superseded standard" for both EN 55022:2006 and EN 55022:2006 A1:207 have been pushed back to 1/10/2011 to allow use of EN 55022:1998 + A1:2000 + A2 :2003 until October 2011.
Anyone have any idea as to why they didn’t just extend the date for implementation of EN 55022 A1:2007, leaving EN 55022:2006 as the interim standard? Mark ________________________________________ From: [email protected] [mailto:[email protected]] Sent: Friday, August 21, 2009 2:39 PM To: Spencer, David H Cc: [email protected] Subject: Re: EN55022:1998, +A1:2000, +A2:2003 Extended You can view the clean PDF of 2009/C 197/03 issued today at the following web address: http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:C:2009:197:0003:000 3:EN:PDF Based on the 2009/C 197/03, it appears that manufacturers are granted an extra year before their products must meet the requirements of EN55022:2006+A1:2007 which requires testing in 1-6GHz with the 4dB tighter limits compared to FCC in the frequency range 1-3GHz. The new deadline is 1 October 2011. I haven't heard of any issues about floor-standing equipment. We have floor-standing equipment and the testing goes smoothly. However, every information technology manufacturer was under a lot of time pressure to test already released products to the new test methodology and limits -- especially if you have a big product line. With the limits at 1-3GHz being 4dB tighter than FCC, some products may require fixes or an accelerated End-of-Life (EOL) decision. This one year delay gives manufacturers more time to perform the testing and make those decisions. I have some related questions: 1. Will Japan VCCI delay its 1 October 2010 deadline to match Europe? 2. Will China CCC delay its 1 March 2011 deadline to still give an extra five months time after the Europe deadline to go through the in-country test and bureaucracy effort to update the CCC approvals? I would hope the 1-6GHz test requirement would be delayed to at least 1 March 2012. 3. Will China CCC delay its 1 September 2010 deadline to upgrade CCC approvals to include the testing of telecommunications ports? Unfortunately, if this deadline is not extended, we will still have to rush to send all our products to China for testing even if the 1-6GHz test requirement is delayed. Thanks. Monrad L. Monsen Worldwide Compliance Officer Sun Microsystems [email protected] Spencer, David H wrote: I'm assuming this has is due to the huge issues with floor standing EUT's and testing >1GHz. Text From OJ. Aug 21, 2009 "Commission communication in the framework of the implementation of Directive 2004/108/EC of the European Parliament and of the Council on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC (Text with EEA relevance) (Publication of titles and references of harmonised standards under this directive) (2009/C 197/03) The date of cessation of presumption of conformity for ‘EN 55022:1998 Information technology equipment — Radio disturbance characteristics — Limits and methods of measurement (CISPR 22:1997 (Modified))’ and its amendments ‘A1:2000 to EN 55022:1998 (CISPR 22:1997/A1:2000)’ and ‘A2:2003 to EN 55022:1998 (CISPR 22:1997/A2:2002)’ which was set out in the Commission communication published in the Official Journal of the European Union C 126 of 5 June 2009, is postponed until 1 October 2011. Commission communication in the framework of the implementation of Directive 1999/5/EC of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (Text with EEA relevance) (Publication of titles and references of harmonised standards under this Directive) (2009/C 197/04) The date of cessation of presumption of conformity for ‘EN 55022:1998 Information technology equipment — Radio disturbance characteristics — Limits and methods of measurement (CISPR 22:1997 (Modified))’ and its amendments ‘A1:2000 to EN 55022:1998 (CISPR 22:1997/A1:2000)’ and ‘A2:2003 to EN 55022:1998 (CISPR 22:1997/A2:2002)’ which was set out in the Commission communication published in the Official Journal of the European Union C 280 of 4 November 2008, is postponed until 1 October 2011." Regards, David Spencer EMC Engineer Xerox Corp - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
