Your facility EMI filters should provide 100 dB of insertion loss (MIL-STD-220, 50 Ohm system).
If that isn't enough, you can bypass the 28 Volt output with a couple lead acid car batteries. Then you can use a pair of 10 uF feedthrough caps you have laying around, and finally your LISNs. If all that doesn't do the job, you need to do some troubleshooting, see if some of the noise isn't common mode (not spec'd by manufacturer) and build your own cm choke. Ken Javor Phone: (256) 650-5261 > From: Derek Walton <[email protected]> > Date: Fri, 21 Aug 2009 10:13:33 -0500 > To: "[email protected]" <[email protected]> > Subject: 28 volt Linear Power Supply > > Good morning folks, > > I have been requested to perform a conducted emissions test on a unit > that draws up to 50 amps from a 28 volt source. > > I have a 300 amp supply and its a little too noisy being a switcher. > > Can anyone suggest a make/model that can do 28 volts at up to 50 amps > thats either linear or super quiet please. Its very hard researching how > quiet supplies are. > > Many thanks, > > Derek Walton > L F Research > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > Graphics (in well-used formats), large files, etc. can be posted to that URL. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
