Adam, Thank you for your feedback. I think that I've seen that application. Is that produced by Passmark?
Carl On Wed, Jul 22, 2009 at 7:38 AM, Rudd, Adam <[email protected]> wrote: We use an application called BurnInTest. If you copy it’s “endpoint” application to an accessory PC and set its network module into advanced mode you can specify a network load level between the two. It also has a built in scrolling H pattern as well as CPU, memory, hard disk, and video stress modules. It has proven to be extremely useful for our lab. Adam Rudd ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Carl Newton Sent: Tuesday, July 21, 2009 2:44 PM To: [email protected] Subject: 10% - 20% LAN port traffic for EN 55022 CE List members, Please forgive me if this issue has been discussed already, I don't recall seeing it. I'm curious as to what types of software tools\apps are being used to generate and verify this desired level of LAN traffic for conducted emissions measurements in accordance with EN 55022. I'm referring to the following clause in 9.6.3: "In order to make reliable emission measurements representative of high LAN utilization it is only necessary to create a condition of LAN utilization in excess of 10 % and sustain that level for a minimum of 250 ms. The content of the test traffic should consist of both periodic and pseudo-random messages in order to emulate realistic types of data transmission (e.g. random: files compressed or encrypted; periodic: uncompressed graphic files, memory dumps, screen updates, disk images). If the LAN maintains transmission during idle periods measurements shall also be made during idle periods (see Clause E.3, [7])." I'm also referring to ECANB TGN 16, section 3 (Guidelines) where it is recommended that a 10% - 20% traffic rate be used, and where it is flatly stated that a 100% traffic rate will fail with the recommended ISN. Thanks in advance, Carl - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
