This is the same welder I use and am very happy with it. Bought it over 10 years ago and it is still going strong. Needed to replace the needle nose pliers used to hold onto the TC wires once (some of the techs here are not very careful with their welding). My only complaint about it would be that the warning buzzer is too loud, but a piece of well placed tape solved that problem.
Dan From: Chris [mailto:[email protected]] Sent: Monday, June 15, 2009 10:42 PM To: [email protected] Subject: [PSES] Thermocouple welder Pete, <http://dcccorporation.thomasnet. om/item/thermocouple-welders/hotspot-i- i-thermocouple-welders/item-1112?&plpver=10&origin=compare&filter=0&CTypeID=2> You can try this site. This welder is easy to use once you have secured the carbon block. http://dcccorporation.thomasnet.com/ite /thermocouple-welders/hotspot-i-ii-ther ocouple-welders/item-1112?&plpver=10&origin=compare&filter=0&CTypeID=2 Christopher --- On Mon, 6/15/09, [email protected] <[email protected]> wrote: From: [email protected] <[email protected]> Subject: Thermocouple welder To: [email protected] List-Post: [email protected] List-Post: [email protected] List-Post: [email protected] Date: Monday, June 15, 2009, 4:47 PM Hello friends, I am looking to purchase a very inexpensive thermocouple welder for type J and K as I have a small budget. Can anyone help please? I don't mind a used or refurbished unit. Thank you Pete ________________________________ A Good Credit Score is 700 or Above. See yours in just 2 easy steps! <http://pr.atwola.com/promoclk/10012657 x1221322979x1201367215/aol?redir=http:/ www.freecreditreport.com/pm/default.asp ?sc=668072%26hmpgID=62%26bcd=JunestepsfooterNO62> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
