Hi David,

you can use 315 MHz as well as 868 MHz for SRD in India.
When using 433 MHzyou currently need to apply for a user license.
This might change next year.

Best regards / Mit freundlichen Grüßen
Karin Silberhorn
Team Manager
International Type Approval

CETECOM GmbH
Im Teelbruch 116 - 45219 Essen - Germany
Tel.:        +49 (0) 20 54 95 19 942
Fax:        +49 (0) 20 54 95 19 902

e-mail:   [email protected] 
home page: www.cetecom.com

Registered Amtsgericht Essen, Germany (Reg.-No.: HRB Essen 8984)
Chairman of the Supervisory Board: Dr. Wilhelm Wick
Board of Directors: Dr. Harald Ansorge, Dr. Klaus Matkey, Hans Peter May


From: [email protected] [mailto:[email protected]] On Behalf Of Sterner, David
(NY80)
Sent: Monday, May 18, 2009 9:42 PM
To: [email protected]
Subject: Short range device frequencies for India

Does anyone have spectrum assignment frequencies for India?
Although 433 MHz band is available, but it is multipurpose.

Are any other frequency bands acceptable (< 10 mW)?

                _                                Honeywell
                David W. Sterner
                Quality Assurance Engineering
                2 Corporate Center Drive Suite 100
                P.O. Box 9040
                Melville, NY   11747
                Phone: (516) 577-2321 
                Fax: (516) 577-3540
        [email protected]
        <http://www.honeywell.com> 

-

This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>

All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
Graphics (in well-used formats), large files, etc. can be posted to that URL.

Website:  http://www.ieee-pses.org/
Instructions:  http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>

For policy questions, send mail to:
Jim Bacher:  <[email protected]>
David Heald: <[email protected]>

-

This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>

All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
Graphics (in well-used formats), large files, etc. can be posted to that URL.

Website:  http://www.ieee-pses.org/
Instructions:  http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>

For policy questions, send mail to:
Jim Bacher:  <[email protected]>
David Heald: <[email protected]>

Reply via email to