Jeff, The standard for cords and plugs are different than in the US and it would be very expensive for a cord set manufacturer to design to both standards, if at all possible which I doubt it very much. If you wish, e-mail me separately and I can provide you a link (in Japanese) which wil help you find the <PSE> Marked cords of various ratings. There is no national standard in Japan that is harmonized with IEC61010 and the CB Bulletin does not call out Japan. As such no NCB can issue a CB with Japan national deviations. If the invertor is covered by Denan (dc to ac invertors are not covered by Denan) and requires a <PSE> Mark, the invertor can be tested for compliance with Japanese Appedix 8 standard that covers various electrical equipment for safety and emc. If invertor is not covered by Denan and does not require the <PSE> Mark, you can approach a Japanese certification body like TUV Rheinland and they can issue voluntary Japan S Mark approval to IEC61010. Such a cert and Mark will require annual follow-up inspections at the factory
--- On Thu, 4/23/09, [email protected] <[email protected]> wrote: From: [email protected] <[email protected]> Subject: Safety: Japan PSE vs UL Power Cords and Japan CB Cert to IEC 1010 To: [email protected] Date: Thursday, April 23, 2009, 1:17 PM Group, ( Sleepless in Japan ) I'm having a hard time finding a standard 120VAC 15 amp, 18 AWG power cord with both the UL and PSE Safety Marks. I've tried several power cord manufacturers and they state this combo does not exist. If so why not???? I have power supplies that are both PSE and UL recognized. Also, I have an inverter that is certified to IEC 1010 with a CB scheme certificate. We need Japan as part of the country deviations listed on the certificate but the Competent Body we chose is unable to list Japan to IEC 1010 on the certificate. Are there any CB's that can provide CB scheme certification for Japan to IEC 1010? Peter: No Thanks, Jeff Collins Compliance & Reliability - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
