All,
Does anyone have a source for a 1700uF cap as specified in IEC 61000-4-11, Annex A. I’ve found several capacitors that meet some of the criteria but not all. The parameters are; capacitance, voltage rating, tolerance and ESR. The closest value capacitor I was able to find was 1500uF which met all of the requirements. I had considered purchasing three or four of those, hoping that at least one would run on the high side and measure at 1700 +/- 20%. Obviously, I would prefer to locate a single capacitor with the advertised specifications that meet the requirements per IEC 61000-4-11. Any help would be appreciated. Regards, Steve O'Steen [email protected] <mailto:[email protected]> ****************CONFIDENTIAL**************** This e-mail and any attachments may contain information which is confidential, proprietary, privileged or otherwise protected by law. The information is solely intended for the named addressee (or a person responsible for delivering it to the addressee). If you are not the intended recipient of this message, you are not authorized to read, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete it from your computer. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
