Following the 60335 series standards it explains that monitoring temperature involves recording delta T (temperature rise), this is the temperature which is used when considering steady state conditions.
Jacob From: John Woodgate <[email protected]> To: <[email protected]> Date: 12/01/2012 12:25 Subject: Re: [PSES] Steady State Conditions - née thermal equilibrium In message <[email protected]>, dated Thu, 12 Jan 2012, Anthony Thomson <[email protected]> writes: >"A not practical one: fluctuations of more than that typically occur in >test area ambient temperatures, especially one that contains a 2 kW >lamp!" > > > Steady state is reached when the *difference* between the ambient >temperature and the test subject temperature levels out, you need to be >monitoring the ambient temperature as well. > Do all the definitions make that quite clear? -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK Some people who are peeling the finch of the financial crisis are thinking of biting a rook. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
