Michael and Others, Thank you very much for comments.
The contractor did say he would come back if needed. I am too busy to schedule another time for him. He found out moving the receiving antenna 4 degrees from the original location made all the data good. I had him retake data with antenna center right at the 2m boundary, vertical polarization, at 1 meter height. Best regards, Grace On Fri, Jan 13, 2012 at 10:43 AM, Sundstrom, Michael < [email protected]> wrote: > Grace, > You are paying the contractor for his expertise in NSA. *So I'd assume*if it > was done wrong they'd have to come back and do it right? > > Michael Sundstrom > > > -----Original Message----- > From: John Woodgate [mailto:[email protected] <[email protected]>] > Sent: Thursday, January 12, 2012 2:28 PM > To: [email protected] > Subject: Re: [PSES] [***] Biconical Antenna Location During NSA for > Off-Center Positions > > In message > <CAJq2vagRL0G4aQuE=fyh7mqo-32jhnawkrndod2465zyr79...@mail.gmail.com>, > dated Thu, 12 Jan 2012, Grace Lin <[email protected]> writes: > > >. I cannot remember how NSA was performed when the chamber was built > >four years ago > > I can't answer your question, but I recommend you take photographs this > time. > -- > OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.ukJohn > Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK Some people > who are peeling the finch of the financial crisis are thinking of biting a > rook. > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> > > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > > Jim Bacher <[email protected]> > David Heald <[email protected]> > > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
