The FCC will approve handsets that are designed with batteries that can be charged wirelessly through their battery covers, only if the implementation is in accordance with the Wireless Power Transfer Interface Definition and Protocol (WPTIDP) requirements established by the Wireless Power Consortium (WPC standard).The handset wireless battery charging cover design should not deviate from this standard; it must include the operating frequencies, receiving coil design, and communication requirements of the standard. Furthermore, the charging hardware must be incorporated as an integral part of the battery cover, which is supplied by the manufacturer, or which can be acquired as an optional accessory for a specific handset model from the manufacturer.
If your handset wireless battery charging cover meets the requirements in the WPC standard, and if it is tested in accordance with the FCC's procedure described in KDB 648474-D03-Handset-Wireless-Battery-Chargers-v01r01<http://rheintech.com/index.php?option=com_acymailing&ctrl=url&urlid=751&mailid=38&subid=6846>, a PBA is not required for TCB review and approval. If your handset wireless charging battery cover utilizes other wireless protocols, you should submit a KDB inquiry to the FCC to confirm the test requirements first, and to avoid issues during the equipment certification process. -Tim From: Moshe Henig [mailto:[email protected]] Sent: Tuesday, January 24, 2012 1:20 AM To: [email protected] Subject: [PSES] FCC requirements for Inductive Chargers Dear Group, What are FCC requirements for Mobile Phone Battery Inductive Charger and what are the conditions? Thanks Moshe Henig Dipl. Ing. NCE SMIEEE iNarte Certified EMC engineer EMC and Safety consultant Mobile +972 52 8951449 Skype mhenig [email protected]<mailto:[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
