Hi Steve, The answer to your question resides in ISO 7637-2's title and scope as you've indicated, which specifically intend to have the tests described therein applied to road vehicles.
However, I believe the standard you're probably looking for to apply in an aircraft environment is RTCA DO-160 "Environmental Conditions and Test Procedures for Airborne Equipment". IHTH. Best regards, Ron From: Steve O'Steen [mailto:steve.ost...@acstestlab.com] Sent: Tuesday, February 14, 2012 7:03 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] Transient and Surge Test per ISO7637-2 All, I was reviewing Table 2, Immunity Requirements for a DC Powered Device intended for use in commercial Aircraft. This would integrated into the DC power system of the aircraft and not meant to be carried on and off the aircraft. I assume that an aircraft meets the definition of a vehicle so I started down the path of applying the immunity requirements for Radio and ancillary equipment for vehicular use (e.g. mobile equipment). This column requires among other tests, the Transients and Surge Test per ISO7637-2. However ISO 7637-2 is specific in that its scope is limited to Road Vehicles. To confirm, does this mean that although referenced in the product standard, these tests would not apply to vehicles other than road vehicles? Best Regards, Steve O'Steen EMC Director Advanced Compliance Solutions, Inc. sost...@acstestlab.com<mailto:sost...@acstestlab.com> 770-831-8048 ext. 210 www.acstestlab.com<http://www.acstestlab.com/> ATLANTA, GA - MELBOURNE, FL - BOCA RATON, FL ****************CONFIDENTIAL**************** This e-mail and any attachments may contain information which is confidential, proprietary, privileged or otherwise protected by law. The information is solely intended for the named addressee (or a person responsible for delivering it to the addressee). If you are not the intended recipient of this message, you are not authorized to read, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete it from your computer. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net<mailto:emcp...@radiusnorth.net>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>