Hi Kim,
there is no conflict.
In the german version of the law is the same paragraph:
Sorry, German only:
"Die Angaben nach Satz 1 Nummer 2 und 3 sind auf dem
Verbraucherprodukt oder, wenn dies nicht möglich ist, auf dessen
Verpackung anzubringen."
Sentence 2 in the law is the relevant one where the required
information are described.
So it is allowed to print the information on the package.
Bye-By(e), Thomas
Zitat von "Kim, Ben" <[email protected]>:
What if it conflicts with upcoming LVD Directive ? The EU LVD/EMC
directives are currently under revision as part of alignment with
new NLF Directive,
and placing those importer contact information in a document will be
one of the allowed options once the proposal is passed by EU Council
(highly likely).
LVD Directive (2006/95)- Alignment package proposal: Article 8
" Importers shall indicate their name, registered trade name or
registered trade mark and the address at which they can be contacted
on the electrical equipment or,
where that is not possible, on its packaging or in a document
accompanying the electrical equipment"
Thanks,
Ben Kim
-----Original Message-----
From: John Woodgate [mailto:[email protected]]
Sent: Tuesday, February 28, 2012 3:31 PM
To: [email protected]
Subject: Re: German Product Safety Act (ProdSG) - Label requirement
In message
<72b8947772cf0948adaa9853631663fb6477498...@pbi-namsg-02.mgdpbi.global.pv
t>, dated Tue, 28 Feb 2012, Jim Hulbert <[email protected]> writes:
Under the new German Product Safety Act (ProdSG), as of Dec 2011
consumer products are required to have a label with the name and
address of the manufacturer (or importer if the manufacturer is outside
the EU). Simply providing that information with the operator guide is
not good enough anymore. Does this new requirement apply only to
products that have the GS certification mark, or does it apply to all
consumer products?
If it's an Act - i.e. a law, it must apply to all products.
--
OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
If 'QWERTY' is an English keyboard, what language is 'WYSIWYG' for?
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. To post a message to the list, send your
e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities
site at http://product-compliance.oc.ieee.org/ can be used for
graphics (in well-used formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. To post a message to the list, send your
e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities
site at http://product-compliance.oc.ieee.org/ can be used for
graphics (in well-used formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
