We had to pursue SAR calculations/tests. from 2008, source of good information Remcom 1-888-773-6266 315 South Allen Street, Suite 222 State College, PA 16801 Tel: 814-861-1299 1-888-773-6266 (1-888-7REMCOM) Toll-Free in U.S. and Canada Fax: 814-861-1308 1-888-973-6266 (1-888-9REMCOM) Toll-Free in U.S. and Canada http://www.remcom.com
use SAR Models from Hershey Medical Center they contain characteristics of tissue versus frequency --- [email protected] wrote: From: "Steve O'Steen" <[email protected]> To: [email protected] Subject: [PSES] Inductive Chargers Date: Tue, 6 Mar 2012 09:10:34 -0500 I'm considering the compliance path for several devices, one of which is an inductive charger. I've located one publication off of the KDB website, Pub # 680106, which defines when and how either Part 15 or 18 are used. What about the rest of the world? As far as CE mark, my first inclination was EN 301 489-1 and -3 for the EMC portion of the R&TTE Directive but, I'm not sure which radio standard would apply. The KDB publication also mentions the possible need for an RF exposure evaluation. Would there be an equivalent requirement for CE marking? Another product I'm looking into is similar to an inductive charging system but, instead of a charging function this system uses the lower frequency transmission to power another device in the system to perform a specific function. Although both of these systems use very similar transmission techniques and occupy a similar band the overall function is different. Would this affect the compliance path between these two systems? Any input would be appreciated. Regards, Steve O'Steen EMC Director Advanced Compliance Solutions, Inc. [email protected] 770-831-8048 ext. 210 www.acstestlab.com <http://www.acstestlab.com/> ATLANTA, GA - MELBOURNE, FL - BOCA RATON, FL ****************CONFIDENTIAL**************** This e-mail and any attachments may contain information which is confidential, proprietary, privileged or otherwise protected by law. The information is solely intended for the named addressee (or a person responsible for delivering it to the addressee). If you are not the intended recipient of this message, you are not authorized to read, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete it from your computer. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
