Dear Members, Could you please give your comments on the test setup for a display (touchpanel) powered by a PoE (power over Ethernet) injector? More specifically: 1. Does the PoE injector need to be part of the EUT (equipment under test) and placed on the turntable next to the EUT? Or, can the PoE injector be placed remotely (under the ground plane or outside of the chamber)? The PoE injector is marketed/packaged separately from the EUT. Both the EUT and PoE injector are marketed by the same manufacturer. 2. There are two ports, in addition to the power port, from the PoE injector: "PoE LAN" and "LAN". "PoE LAN" port connects to the EUT. Need the "LAN" port of PoE injector be connected to LAN? 3. Need the "LAN" port of PoE injector be exercised? If yes, is Ping command good enough? Thank you very much for your time and look forward to hearing from you. Best regards, Grace Lin
- ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
