Hi Michael, As I know the 800MHz SRD device in China is from 868MHz to 868.6MHz and should be 5mW.
So you may need to change it. Paul Wang (王卫波) G&M Compliance,Inc.Beijing Office Tel:86-10-58203318 Tel:86-10-67877845 Fax: 86-10-58203316 Cell:86-13810026747 Website: www.gmcompliance.com.cn <http://www.gmcompliance.com.cn/> (China) www.gmcompliance.com <http://www.gmcompliance.com/> (U.S.A.) 发件人: emc-p...@ieee.org [mailto:emc-p...@ieee.org] 代表 Michael Loerzer 发送时间: 2012年4月20日 14:00 收件人: emc-p...@ieee.org 主题: SRD in China Hi, I have a question regarding Chinese short range device requirements. Specification: metering equipment (heat, water) with SRD's 868MHz Band in Europe center frequency 868,95 (frequency band 868,7 - 869,2MHz) 10mW bandwith approx. 250kHz or 434MHz Band in Europe center frequency 434,475MHz 10mW bandwith approx. 250kHz Low Duty Cycle Is such equipment allowed to operate in China? If not which frequency bands are allowed? Any support is appreciated. Best regards Dipl.-Ing. Michael Loerzer Managing Director Regulatory Affairs Specialist Das neue Buch zum Thema "Product Compliance": http://www.beuth.de/de/artikel/produktkonformitaet (Produktkonformität, Prozesse, Risikomanagement, CE-Kennzeichnung, Fallbeispiele für Geschäftsführung, Konstruktion, Normenabteilung, Vertrieb, Einkauf, Produktion, QM) _________________________________________ Globalnorm GmbH Alt-Moabit 94 10559 Berlin Fon +49 30 3229027-51 Mobile +49 170 3229027 Fax +49 30 3229027-59 Mail michael.loer...@globalnorm.de <http://www.globalnorm.de/> www.globalnorm.de <http://www.globalnorm.ca/> www.globalnorm.ca <http://www.product-compliance.com/> www.product-compliance.com _________________________________________ Globalnorm GmbH, Sitz der Gesellschaft: Alt-Moabit 94, 10559 Berlin Geschäftsführer: Dipl.-Ing. Michael Loerzer Amtsgericht Berlin-Charlottenburg HRB 105204 B, USt-ID-Nummer: DE251654448 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
