Hi Moshe, Ron's pointer to the CTIA's website is the one you're looking for.
There is a PDF and an Excel spreadsheet for single cell (1725) and muliple cell (1625) applications - choose the appropriate one. The Certification Requirements PDF will have the technical requirements (pay attention to sections 7 and the general/system level sections). The spreadsheet will show how to demonstrate compliance to the requirements in the Certification Requirement Document (e.g. declaration, CATL test, CATL review, or some combination) for each clause in the PRD document. The spreadsheet is a good place to start to get your overall scope of work. If the power supply is stand-alone (not explicitly paired with a "host" aka "the thing that contains and provides a physical charging interface to the battery pack"), there are special "certified adapter" requirements under select subsections of section 7. Also check the Recognized Adapter and Certified Adapter tabs of the Excel spreadsheet. Best Regards, -Dave Heald On Thu, Apr 5, 2012 at 12:59 PM, Moshe Henig <[email protected]> wrote: > Dear group, > > Can you plrease advice I was asked to find IEEE requirements for > AT&T Power Supplies/Battery Chargers for mobile phones. > > Thanks for your help > > Moshe > > > > Moshe Henig Dipl. Ing. > > NCE SMIEEE > > EMC and Safety consultant > > Mobile 972 52 8951449 > > Skype mhenig > > [email protected] > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
