Just use 2 sets of 2 anti parallel CM coils and couple the common via a third to ground (I suppose).
I do not know your specific application, but in general DM signals come in paired sets of 2...... The only application I know where DM is over 4 wires, is a phantom signal in phone lines. Gert Van: [email protected] [mailto:[email protected]] Namens [email protected] Verzonden: Wednesday, June 13, 2012 7:06 PM Aan: [email protected] Onderwerp: Re: DMRN for 4 wires (EMC) A DMRN (Differential-Mode Reject Network) works well for 2-wires, but has anyone tried for 4 wires? I suppose a common-mode transformer with a bandwidth up to 30MHz would do. Any suggestions from the RF gurus in the group? ________________________________________________________________________ _______ Ralph McDiarmid | Schneider Electric | Solar Business | CANADA | Regulatory Compliance Engineering - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
