If you measured the background magnetic noise level in dBμA in a
typical office at around 15 kHz, using an RBW of 300 Hz and a VBW of 1
kHz, what would be a typical result? Measurements at 3 kHz and every 3
kHz up to 24 kHz would be helpful but not essential.
A result using a Schwartz beck FMB 1538 magnetic antenna would be
particularly pertinent. I have an ill-informed agitator to combat.
--
OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk
Instead of saying that the government is doing too little, too late or too
much, too early, say they've got is exactly right, thus throwing them into
total confusion.
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
