What does the correct value mean? Unless the field intensity is constant over the aperture of both loops, there won¹t be correlation between different size loops. That was the whole point of the comment about what size sensor to use. It cannot be cavalierly dismissed by citing an antenna factor. Ken Javor Phone: (256) 650-5261
From: Bill Owsley <[email protected]> Reply-To: Bill Owsley <[email protected]> Date: Fri, 6 Jul 2012 21:51:30 -0700 (PDT) To: John Woodgate <[email protected]>, "[email protected]" <[email protected]> Subject: Re: FCC maximum frequency measurement with correction factors added in... that should add up to the correct value - right??? From: John Woodgate <[email protected]> To: [email protected] Sent: Friday, July 6, 2012 5:38 PM Subject: Re: FCC maximum frequency measurement In message <cc1ccaba.26aed%[email protected]>, dated Fri, 6 Jul 2012, Ken Javor <[email protected]> writes: > Another practical problem is the size of the sensor. Magnetic sensors range from the handheld to the 60 cm diameter loop mentioned earlier, Up to 2 m (CISPR 16-1-4, Annex C). -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk <http://www.jmwa.demon.co.uk/> and www.isce.org.uk <http://www.isce.org.uk/> Instead of saying that the government is doing too little, too late or too much, too early, say they've got is exactly right, thus throwing them into total confusion. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
