In the US the hams are secondary to the military. Also allowed are RFID tags and police robots as non-interfering tertiary users.
Fred Townsend From: [email protected] [mailto:[email protected]] On Behalf Of Charlie Blackham Sent: Monday, August 20, 2012 5:42 AM To: itl-emc user group; [email protected] Subject: RE: Appropriate ETSI standard for 433 MHz Band Radio David Look at European Frequency Allocations in CEPT ERC report 25, http://www.erodocdb.dk/docs/doc98/official/pdf/ERCRep025.pdf. 433 MHz is allocated as an Amateur Radio Band, EN 301 783. Regards Charlie From: itl-emc user group [mailto:[email protected]] Sent: 20 August 2012 13:20 To: [email protected] Subject: [PSES] Appropriate ETSI standard for 433 MHz Band Radio Hello, Any ideas for the appropriate R&TTE radio standard for a 433 MHz band, 0.5W conducted RF power, radio device? Any ideas will be appreciated. Regards, David Shidlowsky | Technical Writer Address 1 Bat-Sheva St. POB 87, LOD 71100 Israel Tel 972-8-9186113 Fax 972-8-9153101 Mail [email protected]/[email protected] Web <http://www.itl.co.il> www.itl.co.il <http://app.sqm.co.il/SitePages/Questionnaire.aspx> Fill out Customer Satisfaction Survey - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
